No flat tire feeling. No wobble, JUST PURE ENJOYMENT.

True-Track™ – U.S. Patent 7,677,348 B1
If you're just after a cheap Harley wobble fix you can just click off this page now.... but if you're serious about your safety and want to Stop Rearsteer™, Wiggling, Wobbles and Oscillation while riding your rubber mounted Harley, then you've made the right choice to stay.

BEST SELLERS

20-00LR 1993-2008	20-00-09 2009-2016	* **20-00-17FT 2017-2024	20-30 1994-2017	20-00-17 2017-2024

Click product for larger image and more information

* Bikes with kickstand sensor require PN20-00-17FTS
** Will not fit with some aftermarket forward controls and highway pegs

We are not just any stabilizer, we are... the original creators, the innovators of the rear suspension stabilization device for stock rubber mounted Harley Davidson^® motorcycles.

We are the only company to provide a stabilizer for all stock rubber mounted model Harleys, 1980 – present.

True-Track, Inc. has dedicated over 15 years of R & D knowledge to the True-Track stabilizer(s). For 8 years prior to the release of True-Track to the public in 2004, the company had already tested various, nearly identical designs each imitator offers you and with certainty we are here to inform you the imitators do not bring the level of quality nor stability the True-Track stabilizer offers you. Satisfaction guaranteed!

True-Track is the only vibration free suspension HD stabilizer available on the market!

What can True-Track do for you?
 
• Mitigate Bagger Wobble
• Give increased Stability in turns
• Give increased Stability in side winds
• Give increased Stability in overhauling big rigs on the open highway
• Give increased Stability towing your trailer 
• Greatly increases suspension stability vital to bagger racers
• Greatly alleviates bike's tendency to follow grooves and cracks in the road
• Provide confidence in your motorcycle and your riding ability

TOURING | DYNA | FXR | V-ROD | TOOLS

What benefits a True-Track offers:

• Zero-Flex Design
• No transfer of vibration to the chassis
• A rear suspension HD Stabilizer that fits copletely inside the frame rail
• A Stabilizer that will not damage or crack your frame
• A Stabilizer that is CNC machined from 6061-T6 Aluminum with an anodized or raw finish
• A Stabilizer that protects the cast oil pan against road debris and road hazards
   pot holes
   speed bumps
   low driveways
   railer ramps
• A Stabilizer that provides cooling of the motor
• 4 hand tools required – 3/16 & 7/32 allen wrench, 1/2 & 9/16 open end wrench is all you need (Touring models: 1993-2008)
• No jack required – install parked on the kickstand (Touring models: 1993-2008)
• An easy install in about 15 minutes (Touring models: 1993-2008)

Leave us feedback: